PLEASE WAIT.........

Manufacturer	Busch
Stock #	1582
Description	Animal cage
Image
Quantity owned	3
Type	Area Zoo
Area	Zoo
Storage	(*AZ) *Completed Model - Zoo
Year	2014
Notes
Size	34 x 34 mm, 29 mm high

Assembly

Assembled the little house and started the cage.

Gluing together the rest of the cage.

Used conductive paint to connect the bulb in the top of the cage with wires at the bottom of the cage. The conductive paint ran up the back wall and across the ceiing to connect to the tiny LED. The little animal hose was glued to the base and a "sand" floor was applied to the base.

A test of the LED and conductive paint. Works like a charm. Next I will paint the back wall black to cover the conductive paint.

Looing down into the cage at the roof with the LED light.

Started 2 more.

Animal houses completed.

Conductive paint glues down an LED and carries the power down the lack to wires attached to the conductive paint.

Using my LED tester to test the lighting.

Black paint then covers the conductive paint on the roof and back.

Two more bases are created using cardstock and concrete paint..

Green chain link fence installed.

Faller "Sand" used to create a base for the animal cage.

Wires embedded in the conductive paint are covered with the wood back panel.

Lots of clamps and glue to hold that back on.

Lighting test.

Lighting test no flash.

Doors with wood grain and before Dullcote.

Doors installed.

Back to Top